Perry ACW Infantry or even soon to be Russian types
Despite the temporary setback in connection with my 54mm painting experiments I have managed to salvage much from the experience. I tried looking at the end result after a good night's sleep but this did not seem to make any difference to my opinion and so I have consigned the said figures to the nether recesses of one of my storage cupboards to take a look at them in a few days time. Perhaps the passage of time may soften my outlook somewhat!
I did have a very circuitous brainwave though as I pondered this project further. Without going into finite detail (which I will happily do once I have cemented the idea in place) I am on the lookout for some suitable figures to use for a Portable Wargame based pair of late 19th century 'imagi-nations'. This has been inspired via various sources and so I make no claims towards being original with the concept! This is also why I am hankering after an 'old toy soldier' style of figures as, in my opinion, this technique lends itself to the required figures. Using larger scale figures serves to enhance the effect.
The pair of forces I am looking at are Turkish and Russian based - originally it was to have been Greek inspired but I took the view that using the Russians would have a lot more historical resonance. I found myself thumbing through my Osprey Men at Arms on the Russian-Turkish War of 1877 and was immediately struck by a thought. The Russian line infantry of the war of 1877 look very similar to ACW Union troops whilst the Turks look very much like ACW Zouaves. The Turkish Egyptian troops were wearing what evolved into the later Turkish uniform of a plain fez, tunic and trousers but the line wore the more ornate uniform - as did the dreaded 'Bashi Bazouks' - at least in terms of similarity of cut. The Turkish line cavalry were dressed similarly to the Egyptian infantry which was in turn, very close to what a Union cavalryman was wearing. Visions of chopping and swapping around heads etc loomed large - which I am not averse to but it does add to the production time - especially in 54mm soft plastic. However, using the Perry option would merely entail a minor paint job in each case (Green tunics for the Russians and some tweaking for the Turks) there would be the two protagonists - not so much historically accurate; more like close enough for the purposes of an 'imagi-nation'.
ACW Zouaves with the fez either plain or with a turban - how useful is that?!
This was fine up to a point but I had not reckoned on the Perry twins. Why not use 28mm Perry plastic figures as they produce both the infantry, cavalry and Zouaves with the option for changing heads etc already factored in?
ACW plastic cavalry - replace the kepi with a spare fez and voila! - instant Turkish/Egyptian cavalry; 'imagi-nation' for the use of!
This is for me very dangerous ground as Perry figures are very detailed and may not suit the painting technique I want to use but - and again in a very circuitous way - I am sure that a flat colour scheme in conjunction with Army Painter would work out very nicely - certainly if the various examples of painted plastic Romans kicking around on the net are anything to go by. Hold that thought, as they say!
So what does all this mean then? In a nutshell I think that using plastic Perry 28mm figures may - and I emphasise may - have the answer to the question of what figures I should use for this project. It is flying in the face of my original intention to use larger scale figures (ironically some might consider Perry to be 'larger scale figures'!) but it does have some enormous advantages - cost, hard plastic rather than soft and with much in the way of easier conversion potential. Again, the primary consideration will be the painting as I shall have to overcome a lifetime's phobia towards painting anything organic or highly detailed.
Much to ponder with this methinks.
David,
ReplyDeleteVery interesting! I had not thought of using hard plastic figures by the Perrys as a [possible way forward for you but it makes lots of sense.
It also means that you can use hard plastic figures by other manufacturers to expand your range of possible figures.
A goo idea ... and one worth pursuing.
All the best,
Bob
All sounds very interesting. I await the results.
ReplyDeleteDC
ReplyDeleteSounds like an excellent idea to me! I've been working on the plastics front myself (Perry Brits and Victrix Frenchies).
PD
Lots of people have AP'd the Perry miniatures with more than satisfactory results. IIRC there were some on the Warlord website a while back...
ReplyDeleteHi Bob,
ReplyDeleteI must confess that it has ticked an awful lot of the requirement boxes from my perspective! I am actively investigating further and will report on my progress in due course.
All the best,
DC
Hi Rodger,
ReplyDeleteI think this is probably a lot more feasible than most of my ideas - especially as the figures would be used on an 'imagi-nation' basis and thus the fine detail can be suitably 'fudged'.
All the best,
DC
Hi Peter,
ReplyDeleteI noticed and I know of a few gamers that have gone down the plastic mountain route - makes a change from the lead mountain I suppose!
All the best,
DC
Hi Steve,
ReplyDeleteI really do not why I did not think of this in the first place! It just goes to show the old saw of the 'wood for the trees' holds good in the wargaming world as well as the real thing!
Thanks for the heads up.
All the best,
DC
:)
ReplyDeleteI am always impressed with your ingenuity and your take on things
:)
Hi Geordie,
ReplyDeleteThat is very kind of you to say so - I wished my output matched the speed of my ideas though!
All the best,
DC